cmts_scraper.py

@@ -157,111 +157,110 @@ async def sync_cmts_leaves_async(host, username, password, leaf_paths: list, con
         
         for batch_idx, batch in enumerate(batches):
             print(f"🔄 正在處理第 {batch_idx + 1}/{len(batches)} 批次 (共 {len(batch)} 個路徑)...")
+            conn = None
             
             try:
-                # 🧹 [穩定性修復] 全面改用 async with 管理生命週期，確保連線與 process 絕對釋放
-                async with asyncssh.connect(host, username=username, password=password, known_hosts=None) as conn:
-                    async with conn.create_process(term_type='xterm-256color', term_size=(200, 24), encoding='utf-8') as process:
+                conn = await asyncssh.connect(host, username=username, password=password, known_hosts=None)
+                process = await conn.create_process(term_type='xterm-256color', term_size=(200, 24), encoding='utf-8')
 
-                        async def read_until_quiet(timeout=1.0, prompt_pattern: str = None):
-                            output = ""
-                            while True:
-                                try:
-                                    chunk = await asyncio.wait_for(process.stdout.read(4096), timeout=timeout)
-                                    if not chunk: break
-                                    output += chunk
-                                    if "--More--" in chunk or "More" in chunk:
-                                        process.stdin.write(" ")
-                                        await process.stdin.drain()
-                                    # 🌟 精準 Prompt 偵測
-                                    if prompt_pattern and re.search(prompt_pattern, output):
-                                        break
-                                except asyncio.TimeoutError:
-                                    break
-                            return output
-
-                        # 🌟 新增：在第一批次連線時，先抓取設備版本
-                        if cmts_version == "unknown":
-                            process.stdin.write("show version\n")
-                            await process.stdin.drain()
-                            version_output = await read_until_quiet(timeout=1.5, prompt_pattern=r"(?:#|>)")
-                            match = re.search(r"(?:infra|vcmts-cd-0)\s+([\w\.\-]+)", version_output)
-                            if match:
-                                cmts_version = match.group(1)
-
-                        process.stdin.write("config\n")
-                        await process.stdin.drain()
-                        await read_until_quiet(timeout=1.5, prompt_pattern=r"\(config\)#")
-
-                        for path in batch:
-                            # 🌟 優化 1：強迫讓出事件迴圈控制權，讓 FastAPI 去處理其他使用者的請求
-                            await asyncio.sleep(0.01) 
-
-                            # --- 步驟 1：發送 '?' 查詢 ---
-                            command_to_send = f"{path} ?"
-                            process.stdin.write(command_to_send)
-                            await process.stdin.drain()
-                            
-                            output_question = await read_until_quiet(timeout=1.0)
-                            q_data = parse_question_mark_output(output_question)
-                            
-                            backspaces = "\x08" * (len(command_to_send) + 5)
-                            process.stdin.write(backspaces)
-                            await process.stdin.drain()
-                            await read_until_quiet(timeout=0.5)
-
-                            parsed_data = {
-                                "hint": q_data["hint"],
-                                "options": q_data["options"],
-                                "type": "list" if q_data["options"] else "unknown",
-                                "current_value": q_data.get("current_value")
-                            }
-
-                            # --- 步驟 2：判斷是否需要發送 Enter ---
-                            if q_data.get("is_format_only"):
-                                parsed_data["type"] = "string_or_number"
-                                    
-                            elif not q_data["options"]:
-                                process.stdin.write(f"{path}\n")
+                async def read_until_quiet(timeout=1.0):
+                    output = ""
+                    while True:
+                        try:
+                            chunk = await asyncio.wait_for(process.stdout.read(4096), timeout=timeout)
+                            if not chunk: break
+                            output += chunk
+                            if "--More--" in chunk or "More" in chunk:
+                                process.stdin.write(" ")
                                 await process.stdin.drain()
+                        except asyncio.TimeoutError:
+                            break
+                    return output
 
-                                output_enter = await read_until_quiet(timeout=1.0)
-                                enter_data = parse_device_response(output_enter)
+                # 🌟 新增：在第一批次連線時，先抓取設備版本
+                if cmts_version == "unknown":
+                    process.stdin.write("show version\n")
+                    await process.stdin.drain()
+                    version_output = await read_until_quiet(timeout=1.5)
+                    match = re.search(r"(?:infra|vcmts-cd-0)\s+([\w\.\-]+)", version_output)
+                    if match:
+                        cmts_version = match.group(1)
 
-                                parsed_data["type"] = enter_data["type"]
-                                parsed_data["options"] = enter_data["options"]
-                                parsed_data["current_value"] = enter_data["current_value"]
+                process.stdin.write("config\n")
+                await process.stdin.drain()
+                await read_until_quiet(timeout=1.5)
 
-                                if enter_data["type"] != "unknown":
-                                    process.stdin.write("\x03") 
-                                    await process.stdin.drain()
-                                else:
-                                    print(f"⚠️ [Debug] 未知格式 ({path}):\n{enter_data['raw_output']}")
-                                    process.stdin.write("\n")
-                                    await process.stdin.drain()
+                for path in batch:
+                    # 🌟 優化 1：強迫讓出事件迴圈控制權，讓 FastAPI 去處理其他使用者的請求
+                    await asyncio.sleep(0.01) 
 
-                                await read_until_quiet(timeout=0.5)
+                    # --- 步驟 1：發送 '?' 查詢 ---
+                    command_to_send = f"{path} ?"
+                    process.stdin.write(command_to_send)
+                    await process.stdin.drain()
                     
-                            result_data[path] = parsed_data
+                    output_question = await read_until_quiet(timeout=1.0)
+                    q_data = parse_question_mark_output(output_question)
                     
-                            processed_count += 1
-                            event_data = {
-                                "event": "progress", 
-                                "current": processed_count, 
-                                "total": total_paths,
-                                "current_path": path
-                            }
-                            yield json.dumps(event_data) + "\n"
+                    backspaces = "\x08" * (len(command_to_send) + 5)
+                    process.stdin.write(backspaces)
+                    await process.stdin.drain()
+                    await read_until_quiet(timeout=0.5)
 
-                        process.stdin.write("exit\n")
+                    parsed_data = {
+                        "hint": q_data["hint"],
+                        "options": q_data["options"],
+                        "type": "list" if q_data["options"] else "unknown",
+                        "current_value": q_data.get("current_value")
+                    }
+
+                    # --- 步驟 2：判斷是否需要發送 Enter ---
+                    if q_data.get("is_format_only"):
+                        parsed_data["type"] = "string_or_number"
+                            
+                    elif not q_data["options"]:
+                        process.stdin.write(f"{path}\n")
                         await process.stdin.drain()
-                        await read_until_quiet(timeout=1.0)
+                        
+                        output_enter = await read_until_quiet(timeout=1.0)
+                        enter_data = parse_device_response(output_enter)
+                        
+                        parsed_data["type"] = enter_data["type"]
+                        parsed_data["options"] = enter_data["options"]
+                        parsed_data["current_value"] = enter_data["current_value"]
+                        
+                        if enter_data["type"] != "unknown":
+                            process.stdin.write("\x03") 
+                            await process.stdin.drain()
+                        else:
+                            print(f"⚠️ [Debug] 未知格式 ({path}):\n{enter_data['raw_output']}")
+                            process.stdin.write("\n")
+                            await process.stdin.drain()
+                            
+                        await read_until_quiet(timeout=0.5)
+
+                    result_data[path] = parsed_data
+                    
+                    processed_count += 1
+                    event_data = {
+                        "event": "progress", 
+                        "current": processed_count, 
+                        "total": total_paths,
+                        "current_path": path
+                    }
+                    yield json.dumps(event_data) + "\n"
+
+                process.stdin.write("exit\n")
+                await process.stdin.drain()
+                await read_until_quiet(timeout=1.0)
 
             except Exception as e:
                 yield json.dumps({"event": "error", "message": f"批次錯誤: {str(e)}"}) + "\n"
                 continue 
+            finally:
+                if conn: conn.close()
             
-            # --- 步驟 3：寫入快取 (DB or JSON) ---
+                        # --- 步驟 3：寫入快取 (DB or JSON) ---
             try:
                 db_success = False
                 current_ts = int(time.time())
@@ -341,87 +340,83 @@ async def sync_cmts_leaves_async(host, username, password, leaf_paths: list, con
 
 async def fetch_raw_config(host: str, username: str, password: str, config_type: str = "running") -> str:
     """連線至設備並抓取完整的純文字設定檔"""
+    conn = None
     try:
-        # 🧹 [穩定性修復] 全面改用 async with 管理生命週期
-        async with asyncssh.connect(host, username=username, password=password, known_hosts=None) as conn:
-            async with conn.create_process(term_type='xterm-256color', term_size=(200, 24), encoding='utf-8') as process:
+        conn = await asyncssh.connect(host, username=username, password=password, known_hosts=None)
+        process = await conn.create_process(term_type='xterm-256color', term_size=(200, 24), encoding='utf-8')
 
-                async def read_until_quiet(timeout=2.0, prompt_pattern: str = None):
-                    output = ""
-                    while True:
-                        try:
-                            chunk = await asyncio.wait_for(process.stdout.read(4096), timeout=timeout)
-                            if not chunk: break
-                            output += chunk
-                            # 自動翻頁
-                            if "--More--" in chunk or "More" in chunk:
-                                process.stdin.write(" ")
-                                await process.stdin.drain()
-                            # 🌟 精準 Prompt 偵測
-                            if prompt_pattern and re.search(prompt_pattern, output):
-                                break
-                        except asyncio.TimeoutError:
-                            break
-                    return output
+        async def read_until_quiet(timeout=2.0):
+            output = ""
+            while True:
+                try:
+                    chunk = await asyncio.wait_for(process.stdout.read(4096), timeout=timeout)
+                    if not chunk: break
+                    output += chunk
+                    # 自動翻頁
+                    if "--More--" in chunk or "More" in chunk:
+                        process.stdin.write(" ")
+                        await process.stdin.drain()
+                except asyncio.TimeoutError:
+                    break
+            return output
 
-                # 🌟 新增這行：剛連線成功後，先清空終端機的登入歡迎詞 (MOTD) 與雜訊
-                await read_until_quiet(timeout=1.0, prompt_pattern=r"(?:#|>)")
+        # 🌟 新增這行：剛連線成功後，先清空終端機的登入歡迎詞 (MOTD) 與雜訊
+        await read_until_quiet(timeout=1.0)
 
-                # 關鍵修改：根據 config_type 切換模式與指令，並加上 | nomore 關閉分頁
-                if config_type == "full":
-                    # 1. 先進入 config 模式
-                    process.stdin.write("config\n")
-                    await process.stdin.drain()
-                    await read_until_quiet(timeout=1.5, prompt_pattern=r"\(config\)#") # 等待提示字元變成 (config)#
+        # 關鍵修改：根據 config_type 切換模式與指令，並加上 | nomore 關閉分頁
+        if config_type == "full":
+            # 1. 先進入 config 模式
+            process.stdin.write("config\n")
+            await process.stdin.drain()
+            await read_until_quiet(timeout=1.5) # 等待提示字元變成 (config)#
             
-                    # 2. 下達 full-configuration 指令 (🌟 加上 | nomore)
-                    cmd = "show full-configuration | nomore"
-                    process.stdin.write(f"{cmd}\n")
-                    await process.stdin.drain()
-                    raw_output = await read_until_quiet(timeout=3.0, prompt_pattern=r"\(config\)#")
+            # 2. 下達 full-configuration 指令 (🌟 加上 | nomore)
+            cmd = "show full-configuration | nomore"
+            process.stdin.write(f"{cmd}\n")
+            await process.stdin.drain()
+            raw_output = await read_until_quiet(timeout=3.0)
             
-                    # 3. 抓完後退回上一層 (保持良好習慣)
-                    process.stdin.write("exit\n")
-                    await process.stdin.drain()
+            # 3. 抓完後退回上一層 (保持良好習慣)
+            process.stdin.write("exit\n")
+            await process.stdin.drain()
             
-                else:
-                    # running-config 在一般模式即可下達 (🌟 加上 | nomore)
-                    cmd = "show running-config | nomore"
-                    process.stdin.write(f"{cmd}\n")
-                    await process.stdin.drain()
-                    raw_output = await read_until_quiet(timeout=3.0)
+        else:
+            # running-config 在一般模式即可下達 (🌟 加上 | nomore)
+            cmd = "show running-config | nomore"
+            process.stdin.write(f"{cmd}\n")
+            await process.stdin.drain()
+            raw_output = await read_until_quiet(timeout=3.0)
         
-                # 最終退出設備
-                process.stdin.write("exit\n")
-                await process.stdin.drain()
+        # 最終退出設備
+        process.stdin.write("exit\n")
+        await process.stdin.drain()
         
-                # 簡單清理頭尾的雜訊 (例如指令本身的 echo)
-                # 🌟 關鍵修正 1：強化 ANSI 正規表達式，加入對 '?' 的支援 (精準捕捉 \x1b[?7h)
-                cleaned_output = re.sub(r'\x1b\[[0-9;?]*[a-zA-Z]|\x08', '', raw_output)
+        # 簡單清理頭尾的雜訊 (例如指令本身的 echo)
+        # 🌟 關鍵修正 1：強化 ANSI 正規表達式，加入對 '?' 的支援 (精準捕捉 \x1b[?7h)
+        cleaned_output = re.sub(r'\x1b\[[0-9;?]*[a-zA-Z]|\x08', '', raw_output)
         
-                # 2. 清除失去 \x1b 殘留的字面分頁符號 (精準捕捉 [7m--More--[27m[8D[K)
-                cleaned_output = re.sub(r'\[7m\s*--More--\s*\[27m\[\d+D\[K', '', cleaned_output)
+        # 2. 清除失去 \x1b 殘留的字面分頁符號 (精準捕捉 [7m--More--[27m[8D[K)
+        cleaned_output = re.sub(r'\[7m\s*--More--\s*\[27m\[\d+D\[K', '', cleaned_output)
         
-                # 3. 清除純文字的 --More-- (防呆)
-                cleaned_output = re.sub(r'\s*--More--\s*', '', cleaned_output)
+        # 3. 清除純文字的 --More-- (防呆)
+        cleaned_output = re.sub(r'\s*--More--\s*', '', cleaned_output)
 
-                # 🌟 新增 4：清除 CableOS 終端機特有的 (END) 結尾標記
-                cleaned_output = re.sub(r'\s*\(END\)\s*', '', cleaned_output)
+        # 🌟 新增 4：清除 CableOS 終端機特有的 (END) 結尾標記
+        cleaned_output = re.sub(r'\s*\(END\)\s*', '', cleaned_output)
         
-                # 關鍵修正：這裡改用 cleaned_output 來切行！
-                lines = cleaned_output.splitlines()
+        # 關鍵修正：這裡改用 cleaned_output 來切行！
+        lines = cleaned_output.splitlines()
 
-                # 🌟 關鍵修正 2：加入 strip() 避免空白干擾，確保精準踢掉提示字元
-                clean_lines = [
-                    line for line in lines 
-                    if not line.strip().startswith(cmd) 
-                    and not line.strip().startswith("admin@")
-                ]
-                return "\n".join(clean_lines).strip()
+        # 🌟 關鍵修正 2：加入 strip() 避免空白干擾，確保精準踢掉提示字元
+        clean_lines = [
+            line for line in lines 
+            if not line.strip().startswith(cmd) 
+            and not line.strip().startswith("admin@")
+        ]
+        return "\n".join(clean_lines).strip()
 
     except Exception as e:
         raise Exception(f"SSH 連線或抓取設定失敗: {str(e)}")
-
     finally:
         if conn:
             conn.close()

routers/backup.py

@@ -1,4 +1,3 @@
-# --- routers/backup.py ---
 import logging
 import asyncssh
 import asyncio
@@ -18,8 +17,7 @@ from database import (
 )
 
 from cmts_scraper import fetch_raw_config
-# 🌟 [Priority 1 修復] 引入 cmts_config_locks
-from shared import parse_cli_to_tree, cmts_config_locks
+from shared import parse_cli_to_tree, cmts_config_lock  # <== 引入真正的解析器與全域鎖
 
 logger = logging.getLogger(__name__)
 
@@ -225,102 +223,97 @@ async def execute_restore(backup_id: str, req: ExecuteRestoreRequest):
         return StreamingResponse(empty_success(), media_type="application/x-ndjson")
 
     async def restore_generator():
-        # 🌟 [Priority 1 修復] 使用依 IP 隔離的鎖
-        host_lock = cmts_config_locks[req.host]
-        
         # 1. 嘗試取得全域寫入鎖 (避免多人同時打指令)
-        if host_lock.locked():
+        if cmts_config_lock.locked():
             yield json.dumps({"status": "error", "message": "❌ 設備目前正由其他使用者進行配置，請稍後再試。"}) + "\n"
             return
             
-        async with host_lock:
+        async with cmts_config_lock:
             try:
                 yield json.dumps({"status": "progress", "message": "🔄 正在建立 SSH 安全連線..."}) + "\n"
+                conn = await asyncssh.connect(req.host, username=req.username, password=req.password, known_hosts=None)
+                process = await conn.create_process(term_type='xterm-256color', term_size=(200, 24), encoding='utf-8')
 
-                # 🌟 [Priority 2 提前修復] 使用 async with 確保連線與 Process 絕對會被釋放
-                async with asyncssh.connect(req.host, username=req.username, password=req.password, known_hosts=None) as conn:
-                    async with conn.create_process(term_type='xterm-256color', term_size=(200, 24), encoding='utf-8') as process:
-
-                        async def read_until_quiet(timeout=1.0, prompt_pattern: str = None):
-                            output = ""
-                            while True:
-                                try:
-                                    chunk = await asyncio.wait_for(process.stdout.read(4096), timeout=timeout)
-                                    if not chunk: break
-                                    output += chunk
-                                    if "--More--" in chunk or "More" in chunk:
-                                        process.stdin.write(" ")
-                                        await process.stdin.drain()
-                                    # 🌟 精準 Prompt 偵測
-                                    if prompt_pattern and re.search(prompt_pattern, output):
-                                        break
-                                except asyncio.TimeoutError:
-                                    break
-                            return output
-
-                        # 2. 進入設定模式
-                        process.stdin.write("config\n")
-                        await process.stdin.drain()
-                        await read_until_quiet(timeout=1.5, prompt_pattern=r"\(config\)#")
-                        yield json.dumps({"status": "progress", "message": "✅ 成功進入 Global Configuration 模式"}) + "\n"
-
-                        # 3. 逐行寫入並進行 Fail-safe 檢查
-                        for cmd in commands:
-                            process.stdin.write(f"{cmd}\n")
-                            await process.stdin.drain()
-                            out = await read_until_quiet(timeout=0.2, prompt_pattern=r"\(config.*\)#")
-                            
-                            clean_out = re.sub(r'\x1b\[[0-9;]*[mGK]', '', out).strip()
-
-                            # 🚨 Fail-safe 攔截機制與安全撤銷 (Rollback)
-                            if "% Invalid" in clean_out or "% Incomplete" in clean_out or "% Ambiguous" in clean_out:
-                                # 1. 先通知前端正在撤銷
-                                yield json.dumps({
-                                    "status": "progress", 
-                                    "message": "⚠️ 偵測到無效指令，正在執行 abort 放棄所有變更..."
-                                }) + "\n"
-                                
-                                # 2. 對設備下達 abort 指令
-                                process.stdin.write("abort\n")
+                async def read_until_quiet(timeout=1.0):
+                    output = ""
+                    while True:
+                        try:
+                            chunk = await asyncio.wait_for(process.stdout.read(4096), timeout=timeout)
+                            if not chunk: break
+                            output += chunk
+                            if "--More--" in chunk or "More" in chunk:
+                                process.stdin.write(" ")
                                 await process.stdin.drain()
-                                await read_until_quiet(timeout=1.0, prompt_pattern=r"(?:#|>)") # 等待設備處理 abort 並退出 config 模式
+                        except asyncio.TimeoutError:
+                            break
+                    return output
 
-                                # 3. 回報最終錯誤並關閉連線
-                                yield json.dumps({
-                                    "status": "error", 
-                                    "message": f"❌ 寫入中斷且已安全撤銷！失敗指令: {cmd}", 
-                                    "output": clean_out
-                                }) + "\n"
-                                return
+                # 2. 進入設定模式
+                process.stdin.write("config\n")
+                await process.stdin.drain()
+                await read_until_quiet(timeout=1.5)
+                yield json.dumps({"status": "progress", "message": "✅ 成功進入 Global Configuration 模式"}) + "\n"
 
-                            yield json.dumps({
-                                "status": "progress", 
-                                "message": f"執行: {cmd}", 
-                                "output": clean_out
-                            }) + "\n"
+                # 3. 逐行寫入並進行 Fail-safe 檢查
+                for cmd in commands:
+                    process.stdin.write(f"{cmd}\n")
+                    await process.stdin.drain()
+                    out = await read_until_quiet(timeout=0.2)
                     
-                            # 稍微讓出控制權，確保串流順暢
-                            await asyncio.sleep(0.05)
-
-                        # 4. 提交變更 (Commit)
-                        yield json.dumps({"status": "progress", "message": "⏳ 正在寫入 Commit 保存設定..."}) + "\n"
-                        process.stdin.write("commit\n")
-                        await process.stdin.drain()
-                        commit_out = await read_until_quiet(timeout=6.0, prompt_pattern=r"\(config\)#")
-
-                        # 5. 退出並關閉連線
-                        process.stdin.write("exit\n")
-                        await process.stdin.drain()
-                        # 🌟 移除手動 conn.close()，交由 async with 處理
+                    clean_out = re.sub(r'\x1b\[[0-9;]*[mGK]', '', out).strip()
 
+                    # 🚨 Fail-safe 攔截機制與安全撤銷 (Rollback)
+                    if "% Invalid" in clean_out or "% Incomplete" in clean_out or "% Ambiguous" in clean_out:
+                        # 1. 先通知前端正在撤銷
                         yield json.dumps({
-                            "status": "success", 
-                            "message": "✅ 所有差異還原指令已成功送出並 Commit！",
-                            "output": clean_commit
+                            "status": "progress", 
+                            "message": "⚠️ 偵測到無效指令，正在執行 abort 放棄所有變更..."
                         }) + "\n"
                         
+                        # 2. 對設備下達 abort 指令
+                        process.stdin.write("abort\n")
+                        await process.stdin.drain()
+                        await read_until_quiet(timeout=1.0) # 等待設備處理 abort 並退出 config 模式
+                        
+                        # 3. 回報最終錯誤並關閉連線
+                        yield json.dumps({
+                            "status": "error", 
+                            "message": f"❌ 寫入中斷且已安全撤銷！失敗指令: {cmd}", 
+                            "output": clean_out
+                        }) + "\n"
+                        conn.close()
+                        return
+
+                    yield json.dumps({
+                        "status": "progress", 
+                        "message": f"執行: {cmd}", 
+                        "output": clean_out
+                    }) + "\n"
+                    
+                    # 稍微讓出控制權，確保串流順暢
+                    await asyncio.sleep(0.05)
+
+                # 4. 提交變更 (Commit)
+                yield json.dumps({"status": "progress", "message": "⏳ 正在寫入 Commit 保存設定..."}) + "\n"
+                process.stdin.write("commit\n")
+                await process.stdin.drain()
+                commit_out = await read_until_quiet(timeout=6.0)
+                clean_commit = re.sub(r'\x1b\[[0-9;]*[mGK]', '', commit_out).strip()
+
+                # 5. 退出並關閉連線
+                process.stdin.write("exit\n")
+                await process.stdin.drain()
+                conn.close()
+
+                yield json.dumps({
+                    "status": "success", 
+                    "message": "✅ 所有差異還原指令已成功送出並 Commit！",
+                    "output": clean_commit
+                }) + "\n"
+
             except Exception as e:
                 logger.error(f"還原執行失敗: {str(e)}")
                 yield json.dumps({"status": "error", "message": f"SSH 連線或執行發生例外錯誤: {str(e)}"}) + "\n"
 
     return StreamingResponse(restore_generator(), media_type="application/x-ndjson")
+

routers/config.py

@@ -9,8 +9,8 @@ from fastapi import APIRouter, HTTPException
 from pydantic import BaseModel
 from typing import List
 from netmiko import ConnectHandler
-# 🌟 [Priority 1 修復] 引入 cmts_config_locks
-from shared import CMTS_DEVICE, cmts_config_locks, parse_cli_to_tree, deep_split_tree, USE_DB
+# 🌟 移除了舊的 load_settings, save_settings，改用專屬的雙軌機制
+from shared import CMTS_DEVICE, cmts_config_lock, parse_cli_to_tree, deep_split_tree, USE_DB
 from collections import defaultdict
 from fastapi.responses import StreamingResponse
 
@@ -89,9 +89,8 @@ async def execute_cmts_config(req: ConfigRequest):
     commands = [cmd.strip() for cmd in req.script.splitlines() if cmd.strip() and not cmd.strip().startswith('!')]
 
     async def config_streamer():
-        # 🌟 [Priority 1 修復] 使用依 IP 隔離的鎖
-        host_lock = cmts_config_locks[req.host]
-        async with host_lock:
+        # 🛡️ 繼承原本的非同步鎖，確保同一時間只有一個寫入任務執行
+        async with cmts_config_lock:
             try:
                 yield json.dumps({"status": "progress", "message": f"🔌 準備連線至設備 {req.host}..."}) + "\n"
                 
@@ -105,7 +104,7 @@ async def execute_cmts_config(req: ConfigRequest):
                     async with conn.create_process() as process:
                         
                         # 🌟 建立安全的非同步讀取函數 (讀到安靜為止，避免卡死)
-                        async def read_until_quiet(timeout=0.5, prompt_pattern: str = None):
+                        async def read_until_quiet(timeout=0.5):
                             out_data = ""
                             while True:
                                 try:
@@ -114,9 +113,6 @@ async def execute_cmts_config(req: ConfigRequest):
                                     if not chunk:
                                         break
                                     out_data += str(chunk)
-                                    # 🌟 精準 Prompt 偵測
-                                    if prompt_pattern and re.search(prompt_pattern, out_data):
-                                        break
                                 except asyncio.TimeoutError:
                                     break
                             return out_data
@@ -124,7 +120,7 @@ async def execute_cmts_config(req: ConfigRequest):
                         # 1. 進入設定模式
                         process.stdin.write("config\n")
                         await process.stdin.drain()
-                        await read_until_quiet(0.5, prompt_pattern=r"\(config\)#") # 清空歡迎訊息
+                        await read_until_quiet(0.5) # 清空歡迎訊息
                         
                         # 2. 逐行送出指令並回報進度
                         for cmd in commands:
@@ -134,7 +130,7 @@ async def execute_cmts_config(req: ConfigRequest):
                             
                             # ⏱️ 智慧等待：如果是 commit 指令，給予 5 秒讓設備存檔；其他指令等 0.5 秒
                             wait_time = 5.0 if cmd.strip() == "commit" else 0.5
-                            output = await read_until_quiet(wait_time, prompt_pattern=r"\(config.*\)#")
+                            output = await read_until_quiet(wait_time)
                             
                             # 🛡️ 防呆撤銷機制：偵測到錯誤立刻 abort
                             lower_output = output.lower()
@@ -152,7 +148,7 @@ async def execute_cmts_config(req: ConfigRequest):
                         # 3. 退出設定模式
                         process.stdin.write("exit\n")
                         await process.stdin.drain()
-                        final_output = await read_until_quiet(1.0, prompt_pattern=r"(?:#|>)")
+                        final_output = await read_until_quiet(1.0)
                         
                         yield json.dumps({
                             "status": "success", 
@@ -239,7 +235,6 @@ async def generate_cli(req: GenerateCliRequest):
 @router.get("/cmts-ds-rf-port-list")
 async def get_ds_rf_port_list(host: str, username: str, password: str = ""):
     """獲取設備上所有的 DS RF Port 清單"""
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
@@ -247,6 +242,7 @@ async def get_ds_rf_port_list(host: str, username: str, password: str = ""):
         net_connect = ConnectHandler(**device)
         command = 'show running-config | include "cable ds-rf-port"'
         raw_output = str(net_connect.send_command(command, read_timeout=60))
+        net_connect.disconnect()
         
         pattern = r"cable ds-rf-port\s+([0-9:/]+)"
         ports = re.findall(pattern, raw_output)
@@ -259,15 +255,11 @@ async def get_ds_rf_port_list(host: str, username: str, password: str = ""):
         }
     except Exception as e:
         return {"status": "error", "message": str(e)}
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 
 @router.get("/cmts-ds-rf-port-config")
 async def get_ds_rf_port_config(target: str, host: str, username: str, password: str = ""):
     """獲取特定 DS RF Port 的配置，並轉換為樹狀 JSON"""
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
@@ -275,10 +267,10 @@ async def get_ds_rf_port_config(target: str, host: str, username: str, password:
         net_connect = ConnectHandler(**device)
         command = f"show running-config interface cable ds-rf-port {target} | nomore"
         raw_output = str(net_connect.send_command(command, read_timeout=60))
+        net_connect.disconnect()
         
-        # 🌟 [Priority 1 修復] 將 CPU-Bound 任務移至 ThreadPool
-        base_tree = await asyncio.to_thread(parse_cli_to_tree, raw_output)
-        perfect_tree = await asyncio.to_thread(deep_split_tree, base_tree)
+        base_tree = parse_cli_to_tree(raw_output)
+        perfect_tree = deep_split_tree(base_tree)
         
         return {
             "status": "success", 
@@ -287,15 +279,11 @@ async def get_ds_rf_port_config(target: str, host: str, username: str, password:
         }
     except Exception as e:
         return {"status": "error", "message": str(e)}
-    finally:
-        if net_connect:
-            net_connect.disconnect()
     
 
 @router.get("/cmts-full-config")
 async def get_full_config(host: str, username: str, password: str = "", skip_filter: bool = False, config_type: str = "running"):
     """獲取整台 CMTS 的完整配置，並轉換為大型樹狀 JSON"""
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
@@ -311,12 +299,13 @@ async def get_full_config(host: str, username: str, password: str = "", skip_fil
             command = "show running-config | nomore"
             raw_output = str(net_connect.send_command(command, read_timeout=180))
             
+        net_connect.disconnect()
+        
         clean_output = re.sub(r"^(?:Building configuration\.\.\.|Current configuration.*?)\n+", "", raw_output, flags=re.IGNORECASE | re.MULTILINE)
         clean_output = clean_output.lstrip()
 
-        # 🌟 [Priority 1 修復] 將 CPU-Bound 任務移至 ThreadPool
-        base_tree = await asyncio.to_thread(parse_cli_to_tree, clean_output)
-        perfect_tree = await asyncio.to_thread(deep_split_tree, base_tree)
+        base_tree = parse_cli_to_tree(clean_output)
+        perfect_tree = deep_split_tree(base_tree)
 
         # ==========================================
         # 🌟 深度過濾攔截器：改用雙軌過濾器讀取邏輯
@@ -342,16 +331,12 @@ async def get_full_config(host: str, username: str, password: str = "", skip_fil
         return {"status": "success", "data": perfect_tree}
     except Exception as e:
         return {"status": "error", "message": str(e)}
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 @router.get("/cmts-full-config/stream")
 async def get_full_config_stream(host: str, username: str, password: str = "", skip_filter: bool = False, config_type: str = "running"):
     """獲取整台 CMTS 的完整配置 (串流進度回報版)"""
     
     async def config_streamer():
-        net_connect = None
         try:
             # 1. 廣播：正在連線
             yield json.dumps({"status": "progress", "message": f"🔌 正在建立 SSH 連線至 {host}..."}) + "\n"
@@ -375,6 +360,8 @@ async def get_full_config_stream(host: str, username: str, password: str = "", s
                 command = "show running-config | nomore"
                 raw_output = await asyncio.to_thread(net_connect.send_command, command, read_timeout=180)
                 
+            await asyncio.to_thread(net_connect.disconnect)
+            
             # 3. 廣播：正在解析
             yield json.dumps({"status": "progress", "message": "🧩 正在解析配置並建構樹狀圖結構..."}) + "\n"
             await asyncio.sleep(0.1)
@@ -382,9 +369,8 @@ async def get_full_config_stream(host: str, username: str, password: str = "", s
             clean_output = re.sub(r"^(?:Building configuration\.\.\.|Current configuration.*?)\n+", "", raw_output, flags=re.IGNORECASE | re.MULTILINE)
             clean_output = clean_output.lstrip()
 
-            # 🌟 [Priority 1 修復] 將 CPU-Bound 任務移至 ThreadPool
-            base_tree = await asyncio.to_thread(parse_cli_to_tree, clean_output)
-            perfect_tree = await asyncio.to_thread(deep_split_tree, base_tree)
+            base_tree = parse_cli_to_tree(clean_output)
+            perfect_tree = deep_split_tree(base_tree)
 
             # ==========================================
             # 🌟 深度過濾攔截器 (維持原樣)
@@ -413,10 +399,6 @@ async def get_full_config_stream(host: str, username: str, password: str = "", s
             
         except Exception as e:
             yield json.dumps({"status": "error", "message": f"載入失敗: {str(e)}"}) + "\n"
-        finally:
-            # 🌟 [Priority 1 修復] 確保背景連線被正確釋放
-            if net_connect:
-                await asyncio.to_thread(net_connect.disconnect)
 
     # 回傳 NDJSON 串流格式
     return StreamingResponse(config_streamer(), media_type="application/x-ndjson")

routers/leaf_options.py

@@ -51,12 +51,10 @@ async def sse_stream(request: Request, host: str, config_type: str = "running"):
     async def event_generator():
         try:
             while True:
-                # 主動檢查斷線，避免死鎖
                 if await request.is_disconnected():
                     break
                 try:
-                    # [修復 Leak] 延長 timeout 降低輪詢負擔
-                    message = await asyncio.wait_for(client_queue.get(), timeout=5.0)
+                    message = await asyncio.wait_for(client_queue.get(), timeout=1.0)
                     yield message
                 except asyncio.TimeoutError:
                     yield ": keepalive\n\n"
@@ -64,7 +62,6 @@ async def sse_stream(request: Request, host: str, config_type: str = "running"):
         except asyncio.CancelledError:
             pass
         finally:
-            # [修復 Leak] 確保斷線時 Queue 絕對會被移出 active_clients 釋放記憶體
             if channel_key in active_clients:
                 active_clients[channel_key].discard(client_queue)
             

routers/query.py

@@ -30,32 +30,26 @@ def parse_cm_output(raw_text: str) -> list:
 
 @router.get("/cable-modems")
 async def get_cable_modems():
-    net_connect = None
     try:
         net_connect = ConnectHandler(**CMTS_DEVICE)
         raw_output = str(net_connect.send_command("show cable modem"))
+        net_connect.disconnect()
         structured_data = parse_cm_output(raw_output)
         return {"status": "success", "total_count": len(structured_data), "data": structured_data}
     except Exception as e:
         raise HTTPException(status_code=500, detail=f"CMTS Connection Error: {str(e)}")
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 @router.get("/configuration")
 async def get_configuration():
-    net_connect = None
     try:
         net_connect = ConnectHandler(**CMTS_DEVICE)
         net_connect.send_command_timing("config")
         raw_output = net_connect.send_command("show full-configuration | nomore", expect_string=r"#", read_timeout=120)
         net_connect.send_command_timing("exit")
+        net_connect.disconnect()
         return {"status": "success", "data": raw_output}
     except Exception as e:
         raise HTTPException(status_code=500, detail=f"CMTS Error: {str(e)}")
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 @router.get("/cmts-query")
 async def get_cmts_query(
@@ -65,7 +59,6 @@ async def get_cmts_query(
     username: str = Query(...),
     password: str = Query(...)
 ):
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
@@ -114,17 +107,14 @@ async def get_cmts_query(
         cli_command = commands[query_type] + " | nomore"
         net_connect = ConnectHandler(**device)
         raw_output = net_connect.send_command(cli_command, read_timeout=15)
+        net_connect.disconnect()
         
         return {"status": "success", "command": cli_command, "data": raw_output}
     except Exception as e:
         raise HTTPException(status_code=500, detail=f"CMTS Query Error: {str(e)}")
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 @router.get("/cmts-mac-domain-config")
 async def get_mac_domain_config(target: str, host: str, username: str, password: str):
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
@@ -132,6 +122,7 @@ async def get_mac_domain_config(target: str, host: str, username: str, password:
         cli_command = f"show running-config cable mac-domain {target.strip()} | nomore"
         net_connect = ConnectHandler(**device)
         raw_output = str(net_connect.send_command(cli_command, read_timeout=15))
+        net_connect.disconnect()
 
         # 💡 正名工程：更新字典的 Key 為一致性的命名
         config = {
@@ -187,9 +178,6 @@ async def get_mac_domain_config(target: str, host: str, username: str, password:
         return {"status": "success", "data": config}
     except Exception as e:
         raise HTTPException(status_code=500, detail=f"Parse Error: {str(e)}")
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 @router.get("/cmts-mac-domain-list")
 async def get_cmts_mac_domain_list(
@@ -197,13 +185,13 @@ async def get_cmts_mac_domain_list(
     username: str = Query(...),
     password: str = Query(...)
 ):
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
         net_connect = ConnectHandler(**device)
 
         raw_output = str(net_connect.send_command_timing("show running-config cable mac-domain ?"))
+        net_connect.disconnect()
 
         import re
         matches = re.findall(r'\b\d+:\d+/\d+\.\d+\b', raw_output)
@@ -212,9 +200,6 @@ async def get_cmts_mac_domain_list(
         return {"status": "success", "data": mac_domains}
     except Exception as e:
         return {"status": "error", "message": str(e)}
-    finally:
-        if net_connect:
-            net_connect.disconnect()
 
 @router.get("/cmts-version")
 async def get_cmts_version(
@@ -222,13 +207,13 @@ async def get_cmts_version(
     username: str = Query(...),
     password: str = Query(...)
 ):
-    net_connect = None
     try:
         device = CMTS_DEVICE.copy()
         device.update({'host': host, 'username': username, 'password': password})
         net_connect = ConnectHandler(**device)
         
         raw_output = str(net_connect.send_command("show version", read_timeout=15))
+        net_connect.disconnect()
         
         import re
         # 🌟 使用 Regex 尋找 infra 或 vcmts-cd-0 後面的版本號
@@ -241,6 +226,3 @@ async def get_cmts_version(
             
     except Exception as e:
         return {"status": "error", "message": f"CMTS Connection Error: {str(e)}"}
-    finally:
-        if net_connect:
-            net_connect.disconnect()

routers/terminal.py

@@ -9,9 +9,6 @@ router = APIRouter()
 async def websocket_terminal(websocket: WebSocket, host: str, username: str, password: str):
     await websocket.accept()
     conn = None
-    process = None
-    ws_task = None
-    ssh_task = None
     try:
         # 建立連線
         conn = await asyncssh.connect(host, username=username, password=password, known_hosts=None)
@@ -33,8 +30,6 @@ async def websocket_terminal(websocket: WebSocket, host: str, username: str, pas
                     
                     safe_text = data_bytes.decode('utf-8', errors='replace')
                     await websocket.send_text(safe_text)
-            except asyncio.CancelledError:
-                pass
             except Exception as e:
                 print("\n❌ [WS Forward Error] 讀取設備畫面時發生錯誤:")
                 traceback.print_exc()
@@ -52,9 +47,6 @@ async def websocket_terminal(websocket: WebSocket, host: str, username: str, pas
                     process.stdin.write(data_bytes)
                     await process.stdin.drain()
             except WebSocketDisconnect:
-                # 主動拋出，讓外層捕捉以進行資源回收
-                raise
-            except asyncio.CancelledError:
                 pass
             except Exception as e:
                 print("\n❌ [SSH Forward Error] 寫入指令到設備時發生錯誤:")
@@ -71,12 +63,6 @@ async def websocket_terminal(websocket: WebSocket, host: str, username: str, pas
         for task in pending:
             task.cancel()
 
-    except WebSocketDisconnect:
-        print("[DEBUG] WebSocket 正常斷線，正在終止背景任務...")
-        if ws_task and not ws_task.done():
-            ws_task.cancel()
-        if ssh_task and not ssh_task.done():
-            ssh_task.cancel()
     except Exception as e:
         error_msg = f"\r\n\x1b[31mSSH Connection Error: {str(e)}\x1b[0m\r\n"
         try:
@@ -86,13 +72,9 @@ async def websocket_terminal(websocket: WebSocket, host: str, username: str, pas
         print("\n❌ [Connection Error] 建立連線或執行過程中發生錯誤:")
         traceback.print_exc()
     finally:
-        # 🌟 確保 process 與 conn 絕對被關閉，防止 Memory Leak
-        if process:
-            process.close()
         if conn:
             conn.close()
         try:
             await websocket.close()
         except:
             pass
-

shared.py

@@ -258,5 +258,5 @@ def save_settings(settings_data):
     with open(SETTINGS_FILE, "w", encoding="utf-8") as f:
         json.dump(settings_data, f, indent=4, ensure_ascii=False)
 
-# 🌟 [Priority 1 修復] 將全域非同步鎖改為依設備 IP (Host) 隔離的鎖
-cmts_config_locks = defaultdict(asyncio.Lock)
+# 全域非同步鎖：確保同一時間只有一人能執行設定寫入
+cmts_config_lock = asyncio.Lock()

static/app.js

@@ -19,7 +19,7 @@ import {
 import { getGlobalConnectionInfo } from './utils.js';
 
 // 4. 樹狀圖 UI 模組 (Tree UI)
-import { buildTree, buildRealFilterTree, expandAll, collapseAll, clearTreeCache } from './tree-ui.js';
+import { buildTree, buildRealFilterTree, expandAll, collapseAll } from './tree-ui.js';
 
 // 5. 編輯模式與鎖定模組 (Edit Mode)
 import { 
@@ -320,9 +320,6 @@ function toggleQueryInputs(mode) {
 function resetAllManagerData() {
     resetMacDomainData();
 
-    // 🧹 [修復 Leak] 清空前端樹狀圖快取，避免切換設備時發生 OOM
-    clearTreeCache();
-
     const configArea = document.getElementById('macDomainConfigArea');
     if (configArea) configArea.style.display = 'none';
     

static/tree-ui.js

@@ -6,12 +6,6 @@
 export const folderDataCache = {};
 export const filterFolderCache = {};
 
-// 🧹 [修復 Leak] 徹底清空樹狀圖快取，釋放記憶體
-export function clearTreeCache() {
-    for (let key in folderDataCache) delete folderDataCache[key];
-    for (let key in filterFolderCache) delete filterFolderCache[key];
-}
-
 // 魔法函數：當資料夾被點擊展開時，才將 HTML 渲染進去
 window.lazyLoadFolder = function(elementId, isFilter = false) {
     const detailsEl = document.getElementById(`details-${elementId}`);
@@ -74,8 +68,8 @@ export function collapseAll(elementId) {
 // 🌟 核心函數：生成完整設備配置樹狀圖 (Lazy 版)
 // ==========================================
 export function buildTree(node, path = '', isParentCommandGroup = false, mode = 'running') {
-    const htmlParts = [];
-    if (!node || typeof node !== 'object') return htmlParts.join('');
+    let html = '';
+    if (!node || typeof node !== 'object') return html;
 
     for (const [key, value] of Object.entries(node)) {
         const currentPath = path ? `${path}::${key}` : key;
@@ -116,7 +110,8 @@ export function buildTree(node, path = '', isParentCommandGroup = false, mode =
                 </span>
             `;
 
-            htmlParts.push(`
+            // 🌟 關鍵修改：加入 data-* 屬性，並在 ontoggle 時呼叫 lazyLoadFolder
+            html += `
                 <details id="details-${elementId}" class="tree-folder" style="margin-top: 4px; margin-left: 20px;" 
                          data-path="${currentPath}" data-is-group="${isCommandGroup}" data-mode="${mode}"
                          ontoggle="this.querySelector('.icon-closed').style.display = this.open ? 'none' : 'inline-block'; this.querySelector('.icon-open').style.display = this.open ? 'inline-block' : 'none'; if(this.open) window.lazyLoadFolder('${elementId}', false);">
@@ -157,8 +152,9 @@ export function buildTree(node, path = '', isParentCommandGroup = false, mode =
                         <!-- 🌟 延遲渲染：這裡一開始是空的，展開時才會填入 -->
                     </div>
                 </details>
-            `);
+            `;
         } else {
+            // 葉節點邏輯保持不變
             const isVirtualIndex = /^\[\d+\]$/.test(key);
             const isNoCommand = (key === 'no'); 
             const safeValue = (value === null ? '' : value).toString().replace(/"/g, "&quot;");
@@ -203,7 +199,7 @@ export function buildTree(node, path = '', isParentCommandGroup = false, mode =
                 `;
             }
 
-            htmlParts.push(`
+            html += `
                 <div class="tree-leaf-node" 
                      title="${cliCommand}"
                      onmouseover="this.style.backgroundColor='#f1f2f6'" 
@@ -231,10 +227,10 @@ export function buildTree(node, path = '', isParentCommandGroup = false, mode =
                         </span>
                     </div>
                 </div>
-            `);
+            `;
         }
     }
-    return htmlParts.join('');
+    return html;
 }
 
 // ==========================================
@@ -243,8 +239,7 @@ export function buildTree(node, path = '', isParentCommandGroup = false, mode =
 export function buildRealFilterTree(data, parentPath = '', hiddenKeys = [], isParentCommandGroup = false, mode = 'running') {
     if (typeof data !== 'object' || data === null) return '';
 
-    const htmlParts = [];
-    htmlParts.push(`<div style="margin-left: ${parentPath ? '24px' : '0'};">`);
+    let html = `<div style="margin-left: ${parentPath ? '24px' : '0'};">`;
     
     for (const key in data) {
         const value = data[key];
@@ -294,7 +289,7 @@ export function buildRealFilterTree(data, parentPath = '', hiddenKeys = [], isPa
             `;
 
             // 🌟 加入 lazyLoadFolder 觸發
-            htmlParts.push(`
+            html += `
                 <details id="details-${elementId}" class="tree-folder" 
                          data-path="${currentPath}" data-is-group="${isCommandGroup}" data-mode="${mode}"
                          ontoggle="this.querySelector('.icon-closed').style.display = this.open ? 'none' : 'inline-block'; this.querySelector('.icon-open').style.display = this.open ? 'inline-block' : 'none'; if(this.open) window.lazyLoadFolder('${elementId}', true);">
@@ -312,8 +307,9 @@ export function buildRealFilterTree(data, parentPath = '', hiddenKeys = [], isPa
                         <!-- 🌟 延遲渲染 -->
                     </div>
                 </details>
-            `);
+            `;
         } else {
+            // 葉節點邏輯保持不變
             const isVirtualIndex = /^\[\d+\]$/.test(key);
             let displayName = isVirtualIndex ? `<span style="color: #95a5a6; font-weight: normal;">項目 ${key}</span>` : `<b>${key}</b>`;
             const safeValue = (value === null ? '' : value).toString().replace(/"/g, "&quot;");
@@ -334,7 +330,7 @@ export function buildRealFilterTree(data, parentPath = '', hiddenKeys = [], isPa
                 currentIcon = `<svg width="16" height="16" viewBox="0 0 24 24" fill="#e74c3c"><path d="M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm0 18c-4.42 0-8-3.58-8-8 0-1.85.63-3.55 1.69-4.9L16.9 18.31C15.55 19.37 13.85 20 12 20zm6.31-3.1L7.1 5.69C8.45 4.63 10.15 4 12 4c4.42 0 8 3.58 8 8 0 1.85-.63 3.55-1.69 4.9z"/></svg>`;
             }
 
-            htmlParts.push(`
+            html += `
                 <div class="tree-leaf-node"
                      onmouseover="this.style.backgroundColor='#f1f2f6'" 
                      onmouseout="this.style.backgroundColor='transparent'" 
@@ -347,9 +343,9 @@ export function buildRealFilterTree(data, parentPath = '', hiddenKeys = [], isPa
                     <span style="margin-right: 5px;">${displayName}${colonHtml}</span>
                     ${valueHtml}
                 </div>
-            `);
+            `;
         }
     }
-    htmlParts.push('</div>');
-    return htmlParts.join('');
+    html += '</div>';
+    return html;
 }