# --- routers/config.py ---
import re
from fastapi import APIRouter, HTTPException
from pydantic import BaseModel
from typing import List
from netmiko import ConnectHandler
# 💡 確保從 shared 引入 deep_split_tree
from shared import CMTS_DEVICE, cmts_config_lock, parse_cli_to_tree, deep_split_tree, load_settings, save_settings

router = APIRouter()

class ConfigRequest(BaseModel):
    script: str
    host: str
    username: str
    password: str

@router.post("/cmts-config")
async def execute_cmts_config(req: ConfigRequest):
    # 使用非同步鎖，確保同一時間只有一個寫入任務執行
    async with cmts_config_lock:
        try:
            device = CMTS_DEVICE.copy()
            device.update({'host': req.host, 'username': req.username, 'password': req.password})
            
            # 過濾掉空行與註解 (! 開頭的行)
            commands = [cmd.strip() for cmd in req.script.splitlines() if cmd.strip() and not cmd.strip().startswith('!')]
            
            net_connect = ConnectHandler(**device)
            net_connect.send_command_timing("config")
            
            # 批次送出設定指令
            output = net_connect.send_config_set(commands, cmd_verify=False)
            
            net_connect.send_command_timing("exit")
            net_connect.disconnect()
            
            return {"status": "success", "data": output}
        except Exception as e:
            raise HTTPException(status_code=500, detail=f"CMTS Config Error: {str(e)}")


# ==========================================
# 💡 以下為 DS RF Port 動態樹狀查詢 API
# ==========================================

@router.get("/cmts-ds-rf-port-list")
async def get_ds_rf_port_list(host: str, username: str, password: str = ""):
    """獲取設備上所有的 DS RF Port 清單"""
    try:
        device = CMTS_DEVICE.copy()
        device.update({'host': host, 'username': username, 'password': password})
        
        net_connect = ConnectHandler(**device)
        
        # 使用 include 只抓取關鍵字，並把等待時間延長至 60 秒
        command = 'show running-config | include "cable ds-rf-port"'
        raw_output = net_connect.send_command(command, read_timeout=60)
        net_connect.disconnect()
        
        # 使用正規表達式擷取 port 號碼 (例如 62:0/0)
        pattern = r"cable ds-rf-port\s+([0-9:/]+)"
        ports = re.findall(pattern, raw_output)
        unique_ports = sorted(list(set(ports)))
        
        return {
            "status": "success", 
            "data": unique_ports,
            "raw_output": raw_output  
        }
    except Exception as e:
        return {"status": "error", "message": str(e)}


@router.get("/cmts-ds-rf-port-config")
async def get_ds_rf_port_config(target: str, host: str, username: str, password: str = ""):
    """獲取特定 DS RF Port 的配置，並轉換為樹狀 JSON"""
    try:
        device = CMTS_DEVICE.copy()
        device.update({'host': host, 'username': username, 'password': password})
        
        net_connect = ConnectHandler(**device)
        command = f"show running-config interface cable ds-rf-port {target} | nomore"
        raw_output = net_connect.send_command(command, read_timeout=60)
        net_connect.disconnect()
        
        # 1. 初步解析縮排
        base_tree = parse_cli_to_tree(raw_output)
        # 2. 💡 深層解析空白字元，建立完美樹狀結構
        perfect_tree = deep_split_tree(base_tree)
        
        return {
            "status": "success", 
            "data": perfect_tree,         # 回傳完美的樹狀結構
            "raw_cli": raw_output.strip() 
        }
    except Exception as e:
        return {"status": "error", "message": str(e)}
    

@router.get("/cmts-full-config")
async def get_full_config(host: str, username: str, password: str = "", skip_filter: bool = False):
    """獲取整台 CMTS 的完整配置，並轉換為大型樹狀 JSON"""
    try:
        device = CMTS_DEVICE.copy()
        device.update({'host': host, 'username': username, 'password': password})
        
        net_connect = ConnectHandler(**device)
        command = "show running-config | nomore"
        raw_output = net_connect.send_command(command, read_timeout=60)
        net_connect.disconnect()
        
        base_tree = parse_cli_to_tree(raw_output)
        perfect_tree = deep_split_tree(base_tree)

        # ==========================================
        # 💡 深度過濾攔截器：支援多層級路徑 (如 cable.mac-domain)
        # ==========================================
        if not skip_filter:
            settings = load_settings()
            hidden_keys = settings.get("hidden_keys", [])
            
            for path in hidden_keys:
                keys = path.split('.')
                current = perfect_tree
                # 走到倒數第二層
                for k in keys[:-1]:
                    if isinstance(current, dict) and k in current:
                        current = current[k]
                    else:
                        current = None
                        break
                # 刪除最後一層的目標節點
                if isinstance(current, dict) and keys[-1] in current:
                    current.pop(keys[-1], None)
        # ==========================================
        
        return {"status": "success", "data": perfect_tree}
    except Exception as e:
        return {"status": "error", "message": str(e)}
    
# ==========================================
# 💡 系統設定 API (System Settings)
# ==========================================
class SettingsRequest(BaseModel):
    hidden_keys: list[str]

@router.get("/settings/tree-filters")
async def get_tree_filters():
    """獲取目前的樹狀圖隱藏名單"""
    settings = load_settings()
    return {"status": "success", "data": settings["hidden_keys"]}

@router.post("/settings/tree-filters")
async def update_tree_filters(req: SettingsRequest):
    """更新樹狀圖隱藏名單並存檔"""
    save_settings({"hidden_keys": req.hidden_keys})
    return {"status": "success", "message": "系統設定已更新"}